Description
The sturdy electric glider EasyGlider 4 with aileron in the 4. Generation. Its force is to use Thermal and upcurrent, despite a low ground speed, during gliding perfect. The ELAPOR®-classig had been edited is made in Germany at 100%.
Warning: The receiver used with this airplane must be compatible with 50hz analog servos. Using a receiver intended for digital servo frame rate will ruin the included servos.
- Wing with super light and very hard GFK-square spar
- Stiff fuselage because of M-Space-Technology
- Removable fin and horizontal stabilizer
- RR-Version with stuck-on landing-flap
- Modern designed decal sheet with landing-flap
- Efficient and easy ROXXY-engine
The RR-model is put together at 100% at 100% and equipped with MULTIPLEX-servos and a ROXXY-engine. You just have to fix the RC-system, charge a battery (for example ROXXY EVO 3-2200 20C M6), and push in the fin and horizontal stabilizer. Gluing is not necessary!
The EasyGlider 4 is an enjoyment model which cuts a fine figure in aerobatics too.
- Optimized gliding characteristics
- Due to the low ground speed, cranking out thermal is very easy
- Powerful, efficient brushless-engine with S-BEC-controller for long flight durations and a quick vertical flight
- Sturdy because of ELAPOR®-construction
- folding propeller with smart plastic-spinner
- landing aid
– setting up aileron
- Removable fin and horizontal stabilizer – easy to transport
- A lot of space in the fuselage allows different battery sizes
- Comfortable battery changing because of the colored canopy
Technical data
- Airfoil: -
- Bauerfahrung: Anfänger
- Control: H,S,Q,M
- Drive Type: Electric
- Empty weight approx. (g): -
- Flight Skill: Advanced
- Flight weight approx. (g): 1100
- Fuselage: Elapor
- Length (mm): -
- Manufacturer: Multiplex
- Rec. Battery: 3S LiXX
- Rec. engine: BL Outrunner
- Version: PNP- PLUG N PLAY
- Wing-span (mm): 1800
- Wings: Elapor
- Prop set, part #733492
Srianbimmons (verified owner) –
MrMPX got This model to me in short order and in fine shape, packed well including bag of gummy copilots :.> This model goes together in a flash with friction holding wings into their seats and simple triple conductor servo plugs nestling into a cradle that leaves just enough slack wire on each under wing dimple to tuck into the recess. Tail plane fits together well alligns with wing/fuselage nicely Flight dynamics are spot on. Battery fitment is a little wonky, I pushed my receiver into the void in the empennage and used wire with hook to guide antenna even further into the void toward the tail surfaces. I did plow into the ground twice, both times were with dampened rates not giving ol bessie what she needed in a loop, Ouch x 2. The repairs are horrific but man she flies so well! Odd braces under the canopy and fiberglass repair tape /hot glue on nose has made her rather frankened out, to be frank. This model will perform with some authority but respect must be given to the limits. One of my nose in's did a mangle job on the glass reinforcement spar however I did a tight tape splint on this spar and she'll hold till the new one arrives. This model really really slows down and picks up well with throttle up, after slight wind up delay. This Model is one of my favs and well worth the effort in flying. Graceful in the air with good control response. I believe the airframe is well suited to the power combo. Amazing inverted, too! Good grief don't even try to get a radian pro to do anything comparable to what this model will do, i have one of those on my ceiling, too. I cant speak of the thermalling/slope efficiency but she does float well so I am anticipating fun this summer! Highly recommend this model!