Description
All Li-Ion packs listed are build specifically for Flight Comp in the USA. Packs feature spot welded nickel tabs between cells and all wires are soldered to nickel tabs. This is a much more robust solution then soldering directly to the cells. These tabs make our packs more reliable and do not introduce the heat of a soldering iron directly into the cell. Packs are hand checked and charged to 7.9V insuring years long shelf life.
-1100mah
-Rated for 10A Max discharge current
-Perfect for small 4 servo models, or 6 servo models with micro servos (X08H, etc...)
-Pack is delivered charged to 7.9V
-Max charge rate 1A
Pack Dimensions:
- Weight 51 grams
- Length 71 mm
- Diameter 19 mm
Wire Specifications:
- Balance Lead, 22awg silicone
- JR Leads, 26awg
Cell Specifications:
- Size: 18350
- Approximate Diameter: 18.3mm +/- 0.2mm
- Approximate Length: 35.3mm +/- 0.3mm
- Manufacturer Rated Typical Capacity: 1100mah
- Manufacturer Rated Minimum Capacity: 1000mah
- Manufacturer Rated Max Discharge Current: 10A
- Manufacturer Max Charge Rate 1A
- Nominal Voltage: 3.6V
- Peak Voltage: 4.2V
- Weight: Max 26g
- Protected: NO, unprotected
- Style: Flat Top
Charging:
Charge the batteries with standard 2s li-ion programmable chargers. If your charger doesn't list li-ion then 2s lipo program is fine. Charging format is the same constant current then constant voltage in either case. You can charge at 1amp. Max charge 1.33amps. Should come off charger at 8.4v. Never discharge below 6v. Long term storage is best at 7.4v (standard lipo storage charge). Regardless of charging program battery should never exceed 8.4v under any circumstances. Balance charge every 5 cycles.
Reviews
There are no reviews yet.