Description
All Li-Ion packs listed are build specifically for Flight Comp in the USA. Packs feature spot welded nickel tabs between cells and all wires are soldered to nickel tabs. This is a much more robust solution then soldering directly to the cells. These tabs make our packs more reliable and do not introduce the heat of a soldering iron directly into the cell. Packs are hand checked and charged to 7.9V insuring years long shelf life.
This "stick" arrangement is prefect for F3F, F3B, and F3J models. Or any other RC model that needs a high capacity quality receiver pack.
- Standard "JR" type servo connector
- Balance lead
Pack Dimensions:
- Weight 100 grams
- Length 135 mm
- Diameter 19 mm
Wire Specifications:
- Balance Lead, 22awg silicone
- JR Leads, 26awg
Cell Specifications:
- Capacity (Ah): 3.4 Ah ( 3400mAh)
- Charging Voltage (V): 4.2 V
- Energy (Wh): 12.2 Wh
- Energy Density (Wh/L): 730 Wh/L
- Nominal Voltage (V): 3.8V
- Weight (g): 46 g
- Diameter (mm): 18.06 mm (+/- 0.03 mm)
- Height (mm): 65 mm (+/- 0.03 mm)
- Max. Discharge rate: C Raing 2C (Maximum recommended current 6.8A)
- Max Discharge rate (10 sec.): 17A
- Top (positive side): Flat top
- Model: NCR1865J2
- Made in Japan
- Made by Panasonic
Charging:
Charge the batteries with standard 2s li-ion programmable chargers. If your charger doesn't list li-ion then 2s lipo program is fine. Charging format is the same constant current then constant voltage in either case. You can charge at up to 1.6amps. Should come off charger at 8.4v. Never discharge below 6v. Long term storage is best at 7.4v (standard lipo storage charge). Regardless of charging program battery should never exceed 8.4v under any circumstances. Balance charge every 5 cycles.
Reviews
There are no reviews yet.